MCQ
The magnetic susceptibility is
  • $\chi=\frac{I}{H}$
  • B
    $\chi=\frac{B}{H}$
  • C
    $\chi=\frac{M}{V}$
  • D
    $\chi=\frac{M}{H}$

Answer

Correct option: A.
$\chi=\frac{I}{H}$
(a)

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A $40 \mathrm{~kg}$ slab rests on a frictionless floor as shown in the figure. A $10 \mathrm{~kg}$ block rests on the top of the slab. The static coefficient of friction between the block and slab is 0.60 while the kinetic friction is $0.40.$ The $10 \mathrm{~kg}$ block is acted upon by a horizontal force $100 \mathrm{~N}$. If $g=9.8 \mathrm{~m} / \mathrm{s}^2$, the resulting acceleration of the slab will be
Image
A stretched rubber has
A manometer connected to a closed tap reads $4.5 \times 10^5$ pascal. When the tap is opened the reading of the manometer falls to $4 \times 10^5$ pascal. Then the velocity of flow of water is
All of the following statements are correct except
The fundamental note produced by a closed organ pipe is of frequency $f$. The fundamental note produced by an open organ pipe of same length will be of frequency
In this figure, an ideal liquid flows through the tube, which is of uniform cross$-$section. The liquid has velocities $v_A$ and $v_B$, and pressure $P$ and $P$ at points $A$ and $B$ respectively
Image
  1. $v_A=v_B$
  2. $v_B>v_A$
  3. $P=P$
  4. $P>P$
Adiabatic modulus of elasticity of a gas is $2.1 \times 10^5 \mathrm{~N} / \mathrm{m}^2$. What will be its isothermal modulus of elasticity $\left(\frac{C_p}{C_v}=1.4\right)$
A galvanometer of resistance $50\, \Omega$ is connected to a battery of $3\, V$ along with a resistance of $2950\, \Omega$ in series. A full scale deflection of $30$ divisions is obtained in the galvanometer. In order to reduce this deflection to $20$ divisions, the resistance in series should be.......$Ω$
In an isothermal process the volume of an ideal gas is halved. One can say that
The material of fuse wire should have