Question
✓
Answer
(1)
Sol.
$\begin{array}{l} R _{ eq }=2 \Omega \\ I =\frac{2}{2}=1 A\end{array}$
Sol.
$\begin{array}{l} R _{ eq }=2 \Omega \\ I =\frac{2}{2}=1 A\end{array}$
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
When a cube is in limiting equilibrium on an inclined plane and it is about to topple. The coefficient of friction between cube and plane is:-
An increases in pressure required to decreases the $200\,litres$ volume of a liquid by $0.004\%$ in container is ............ $kPa$ (Bulk modulus of the liquid $= 2100\,MPa$ )
→The potential of the point $A$ is greater than that of $B$ by $19\, volt$. What is the potential difference in volts across the $3\,\mu F$ capacitor ?
→A coil of radius $1\, cm$ and of turns $100$ is placed in the middle of a long solenoid of radius $5\, cm$. and having $5\, turns/cm$. parallel to the axis of solenoid The mutual inductance in millihenery will be
→For the circuit shown in the figure, the current $I$ will be .......$A$
→A string is clamed at both the ends and it is vibrating in its $4^{th}$ harmonic. The equation of the stationary wave is $Y =0.3\,sin\,(0.157\,x) \,cos\,(200\pi t)$. The length of the string is ..... $m$ (all quantities are in $SI$ units)
→A compound microscope has an eye piece of focal length $10 \,cm$ and an objective of focal length $4 \,cm$. Calculate the magnification, if an object is kept at a distance of $5 \,cm$ from the objective so that final image is formed at the least distance vision $(20\, cm)$
→A simple telescope, consisting of an objective of focal length $60\, cm$ and a single eye lens of focal length $5\, cm$ is focussed on a distant object is such a way that parallel rays comes out from the eye lens. If the object subtends an angle $2^o$ at the objective, the angular width of the image........$^o$
→Two solid conductors are made up of same material, have same length and same resistance. One of them has a circular cross section of area $A_{1}$ and the other one has a square cross section of area $A_{2}$. The ratio $\frac{A _{1}}{A _{2}}$ is
→$A$ uniform cylinder rests on a cart as shown. The coefficient of static friction between the cylinder and the cart is $0.5$. If the cylinder is $4\, cm$ in diameter and $10\, cm$ in height, which of the following is the minimum acceleration of the cart needed to cause the cylinder to tip over ? ....... $m/s^2$.
→