The work done in increasing the length of a metre long wire of cross-sectional area ........ $J.$ $1\,mm^2$ through $1\,mm$ will be $(Y = 2 \times 10^{11}\,Nm^{-2})$
Diffcult
Download our app for free and get started
Young's modulus $Y=\frac{F / A}{l / L} \Rightarrow F=\frac{Y A}{L} l$ Work done
$d W=F \times d l=\int_{o}^{I} \frac{Y A}{L} l d l=\frac{1}{2} Y A \frac{l^{2}}{L}$ Given $, A=1 m m^{2}=10^{-6}$
$l=1 m m=10^{-3} m, Y=2 \times 10^{11} N m^{-2}, L=1 m=$
$W=\frac{1}{2} \times 2 \times 10^{11} \times 10^{-6} \times\left(10^{-3}\right)^{2} \mathrm{W}=0.1 \mathrm{J}$
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1In an experiment, brass and steel wires of length $1\,m$ each with areas of cross section $1\,mm^2$ are used. The wires are connected in series and one end of the combined wire is connected to a rigid support and other end is subjected to elongation. The stress requires to produced a new elongation of $0.2\,mm$ is [Given, the Young’s Modulus for steel and brass are respectively $120\times 10^9\,N/m^2$ and $60\times 10^9\,N/m^2$ ]View Solution
- 2The area of cross-section of a railway track is $0.01\, {m}^{2}$. The temperature variation is $10^{\circ} {C}$. Coefficient of linear expansion of material of track is $10^{-5} /{ }^{\circ} {C}$. The energy stored per meter in the track is ...... ${J} / {m} .$View Solution
(Young's modulus of material of track is $10^{11} \,{Nm}^{-2}$ ))
- 3View SolutionIn materials like aluminium and copper, the correct order of magnitude of various elastic modulii is
- 4A bottle has an opening of radius $a$ and length $b$. A cork of length band radius $\left( {a + \Delta a} \right)$ where $\left( {\Delta a < < a} \right)$ is compressed to fit into the opening completely (see figure). If the bulk modulus of cork is $B$ and frictional coefficient between the bottle and cork is $\mu $ then the force needed to push the cork into the bottle isView Solution
- 5When a load of $10 \,kg$ is suspended on a metallic wire, its length increase by $2 \,mm$. The force constant of the wire is $....... N / m$View Solution
- 6Increase in length of a wire is $1\, mm$ when suspended by a weight. If the same weight is suspended on a wire of double its length and double its radius, the increase in length will be ........ $mm$View Solution
- 7View SolutionIf the temperature increases, the modulus of elasticity
- 8A uniform cube is subjected to volume compression. If each side is decreased by $1\%,$ then bulk strain isView Solution
- 9The stress-strain curves for brass, steel and rubber are shown in the figure. The lines $A, B$ and $C$ are forView Solution
- 10One end of a metal wire is fixed to a ceiling and a load of $2 \mathrm{~kg}$ hangs from the other end. A similar wire is attached to the bottom of the load and another load of $1 \mathrm{~kg}$ hangs from this lower wire. Then the ratio of longitudinal strain of upper wire to that of the lower wire will be____________.View Solution
[Area of cross section of wire $=0.005 \mathrm{~cm}^2$, $\mathrm{Y}=2 \times 10^{11}\ \mathrm{Nm}^{-2}$ and $\left.\mathrm{g}=10 \mathrm{~ms}^{-2}\right]$