MCQ
Two simple harmonic motions of angular frequency $100$ and $1000\,\,rad\,s^{-1}$ have the same displacement amplitude. The ratio of their maximum acceleration is
- A$1:10^3$
- B$1:10^4$
- C$1:10$
- ✓$1:10^2$
✓
Answer
Correct option: D.
$1:10^2$
d
$\omega_{1}=100 \mathrm{rad} \mathrm{s}^{-1} ; \omega_{2}=1000 \mathrm{rad} \mathrm{s}^{-1}$
$\omega_{1}=100 \mathrm{rad} \mathrm{s}^{-1} ; \omega_{2}=1000 \mathrm{rad} \mathrm{s}^{-1}$
Maximum acceleration of $(1)=-\omega_{1}^{2} A$
Maximum acceleration of $(2)=-\omega_{2}^{2} A$
$\therefore \frac{\operatorname{accln}(1)}{\operatorname{accln}(2)}=\frac{\omega_{1}^{2}}{\omega_{2}^{2}}=\frac{(100)^{2}}{(1000)^{2}}=\frac{1}{100}$
$a(1): a(2)=1: 100$.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
Alaminar stream is flowing vertically down from a tap of cross-section area $1$ $cm^2$. At a distance $10 $ $cm$ below the tap, the cross-section area of the stream has reduced to $1/2$ $cm^2$. The volumetric flow rate of water from the tap must be about ........ $litre/\min$
→The dimensions of energy per unit volume are the same as those of:
$Assertion :$ For the formation of stationary waves the medium must be bounded having definite boundaries.
$Reason :$ In the stationary wave, some particles of the medium remain permanently at rest.
→$Reason :$ In the stationary wave, some particles of the medium remain permanently at rest.
Four identical discs each of mass ' $M$ ' and diameter ' $a$ ' are arranged in a small plane as shown in figure. If the moment of inertia of the system about $OO ^{\prime}$ is $\frac{ x }{4} Ma ^{2}$. Then, the value of $x$ will be $......$
→Match List $I$ with List $II$
→| LIST$-I$ | LIST$-II$ |
| $(A)$ Torque | $(I)$ $ML ^{-2} T ^{-2}$ |
| $(B)$ Stress | $(II)$ $ML ^2 T ^{-2}$ |
| $(C)$ Pressure of gradient | $(III)$ $ML ^{-1} T ^{-1}$ |
| $(D)$ Coefficient of viscosity | $(IV)$ $ML ^{-1} T ^{-2}$ |
Choose the correct answer from the options given below
Electric field in a certain region is given by $\overrightarrow{ E }=\left(\frac{ A }{ x ^2} \hat{ i }+\frac{ B }{ y ^3} \hat{ j }\right)$. The $SI$ unit of $A$ and $B$ are
→Surface tension at critical temperature becomes:
In a vertical circle of radius $r$, at what point in its path a particle has tension equal to zero if it is just able to complete the vertical circle
→If force and displacement of particle in direction of force are doubled. Work would be
Which of the following has the maximum momentum?