Question
What is called P-N junction? Name the methods of making P-N junction. Explain the diffusion method of making $P - N$ junction.

Answer

P-N Junction: If P and N type semiconductors are joined together and kept in such a way that the atoms of the contact plane come together, then the contact plane formed in this way is called $P - N$ junction. There are three methods of making P-N junction :
(1) Growth
(2) Diffusion
(3) Metal Mixture.
Diffusion method of making P-N junction : In this at high temperature in a muffle furnace, impurity semiconductor is formed by bringing the intrinsic semiconductor wafer with appropriate impurity in contact with steam. The impurity semiconductor thus obtained is now known as the opposite impurity diffusion is caused by bringing atoms (P-type semiconductor with V-group element and Ntype semiconductor with III-group element) in contact. The amount of diffusion decreases with depth. As a result, as far as there are impurities in the crystal, joints are present there.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions


The figure shows experimental set up of a meter bridge. When the two unknown resistances X and Y are inserted, the null point D is obtained 40 cm from the end A. When a resistance of 10 Ω is connected in series with X, the null point shifts by 10 cm. Find the position of the null point when the 10 Ω resistance is instead connected in series with resistance ‘Y’. Determine the values of the resistances X and Y.

A solid sphere is set into motion on a rough horizontal surface with a linear speed v in the forward direction and an angular speed $\frac{\text{v}}{\text{R}}$ in the anticlockwise direction as shown in figure. Find the linear speed of the sphere:
  1. When it stops rotating.
  2. When slipping finally ceases and pure rolling starts.

The spectrum of a star in the visible and the ultraviolet region was observed and the wavelength of some of the lines that could be identified were found to be:
$824\mathring{\text{A}},970\mathring{\text{A}},1120\mathring{\text{A}},2504\mathring{\text{A}},5173\mathring{\text{A}},6100\mathring{\text{A}}$
Which of these lines cannot belong to hydrogen atom spectrum? (Given Rydberg constant $\text{R}=1.03\times10^7\text{m}^{-1}$ and $\frac{1}{\text{R}}=970\mathring{\text{A}}$ Support your answer with suitable calculations.
Two identical particles, each having a charge of 2.0 × 10-4C and mass of 10g, are kept at a separation of 10cm and then released. What would be the speeds of the particles when the separation becomes large?
Electrons are continuously in motion within a conductor but there is no current in it unless some source of potential is applied across its ends. Give reason.
Mass of a particle depends on its speed. Does the attraction of the earth on the particle also depend on the particle's speed?
Two capacitors of unknown capacitances C1 and C2 are connected first in series and then in parallel across a battery of 100 V. If the energy stored in the two combinations is 0.045 J and 0.25 J respectively, determine the value of C1 and C2. Also calculate the charge on each capacitor in parallel combination.
  1. What are the three basic units in communication systems? Write briefly the function of each of these.
  2. Write any three applications of the internet used in communication systems.
A rectangular wire loop of width a is suspended from the insulated pan of a spring balance, as shown in A current i exists in the anti-clockwise direction in the loop. A magnetic field Bexists in the lower region. Find the change in the tension of the spring if the current in the loop is reversed.

An ideal gas $\Big(\frac{\text{C}_\text{P}}{\text{C}_\text{V}}=\gamma\Big)$ is taken through a process in which the pressure and the volume vary as p = aVb. Find the value of b for which the specific heat capacity in the process is zero.