MCQ
What is increased in step $-$ down transformer
- AVoltage
- ✓Current
- CPower
- DCurrent density
✓
Answer
Correct option: B.
Current
Current
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A medium shows relation between $i$ and $r$ as shown. If speed of light in the medium is $n c$ then value of $n$ is
→
A slab consists of two parallel layers of copper and brass of the same thickness and having thermal conductivities in the ratio $1: 4$. If the free face of brass is at $100^{\circ} \mathrm{C}$ and that of copper at $0^{\circ} \mathrm{C}$, the temperature of interface is
→light waves producing interference have their amplitudes in the ratio $3: 2$. The intensity ratio of maximum and minimum of interference fringes is
→Ohm's law is true
The potential gradient along the length of a uniform wire is 10 volt/metre. $B$ and $C$ are the two points at $30 \mathrm{~cm}$ and $60 \mathrm{~cm}$ point on a meter scale fitted along the wire. The potential difference between $B$ and $C$ will be
→An ideal gas heat engine operates in a Carnot's cycle between $227^{\circ} \mathrm{C}$ and $127^{\circ} \mathrm{C}$. It absorbs $6 \times 10 \mathrm{~J}$ at high temperature. The amount of heat converted into work is $......$
→The charge on a hole is equal to the charge of
Cyclotron is used to accelerate
Interference was observed in interference chamber when air was present, now the chamber is evacuated and if the same light is used, a careful observer will see
An ideal gas expands isothermally from a volume $V_1$ to $V_2$ and then compressed to original volume $V_1$ adiabatically. Initial pressure is $P_1$ and final pressure is $P_3$. The total work done is $W$. Then
→