Question
When the base current in a transistor is changed from $30\mu\text{A}$ to $80\mu\text{A},$ the collector current is changed from 1.0mA to 3.5mA. Find the current gain $\beta.$

Answer

$\delta\text{I}_\text{b}=80\mu\text{A}-30\mu\text{A}=50\mu\text{A}=50\times10^{-6}\text{A}$
$\delta\text{I}_\text{c}=3.5\text{mA}-1\text{mA}$ $=-2.5\text{mA}=2.5\times10^{-3}\text{A}$
$\beta=\Big(\frac{\delta\text{I}_\text{c}}{\delta\text{I}_\text{b}}\Big)\text{V}_\text{ce}$ = constant
$\Rightarrow\frac{2.5\times10^{-3}}{50\times10^{-6}}=\frac{2500}{50}=50$
Current gain = 50.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Figure shows a smooth pair of thick metallic rails connected across a battery of emf $\in$ having a negligible internal resistance. A wire ab of length l and resistance r can slide smoothly on the rails. The entire system lies in a horizontal plane and is immersed in a uniform vertical magnetic field B. At an instant t, the wire is given a small velocity u towards right.
  1. Find the current in it at this instant. What is the direction of the current?
  2. What is the force acting on the wire at this instant?
  3. Show that after some time the wire ab will slide with a constant velocity. Find this velocity.

A charge of 1.0C is placed at the top of your college building and another equal charge at the top of your house. Take the separation between the two charges to be 2.0km. Find the force exerted by the charges on each other. How many times of your weight is this force?
What is drift velocity? Explain the dependence of drift velocity and electric field on the mobility.
Explain briefly the process of charging a parallel plate capacitor when it is connected across a d.c. battery. A capacitor of capacitance ‘C’ is charged to ‘V’ volts by a battery. After some time the battery is disconnected, and the distance between the plates is doubled. Now a slab of dielectric constant, 1 < k < 2, is introduced to fill the space between the plates. How will the following be affected:
  1. The electric field between the plates of the capacitor.
  2. The energy stored in the capacitor.
Justify your answer by writing the necessary expressions.
A semiconductor has equal electron and hole concentration of 2 × 108/m3. On doping with a certain impurity, the hole concentration increases to 4 × 1010/m3.
  1. What type of semiconductor is obtained on doping?
  2. Calculate the new electron and hole concentration of the semiconductor.
  3. How does the energy gap vary with doping?
A straight horizontal wire of mass 10mg and length 1.0m carries a current of 2.0A. What minimum magnetic field B should be applied in the region, so that the magnetic force on the wire may balance its weight?
A p-n junction germanium diode when forward biased has a drop of 0.3V which is assumed to be independent of current. The current in excess of 10mA through the diode produces a large Joule-heating which damages (burns) the diode. If we want to use a 1.5V battery to forward-bias the diode, what should be the value of resistor used in series with the diode, so that the maximum current does not exceed 6mA?

For a CE-transistor amplifier, the audio signal voltage across the collector resistance of 2 k$\Omega$ is 2 V. suppose the current amplification factor if the transistor is 100, find the input signal voltage and base current if the base resistance is 1 k$\Omega$.
Two identical cells of emf 1.5 V each joined in parallel supply energy to an external circuit consisting of two resistances of 7 $\Omega$ each joined in parallel. A very high resistance voltmeter reads the terminal voltage of cells to be 1.4 V. Calculate the internal resistance of each cell.
What is the nature of electrostatic force between two point electric charges q1 and q2 if:
  1. q1 + q2 > 0?
  2. q1 + q2 < 0?