MCQ
Which relation is correct for the power of compound microscope ?
  • $M=-\frac{L}{f_{0}}(1+\frac{D}{f_{e}})$
  • B
    $M=-\frac{f_{0}}{L}(1+\frac{D}{f_{e}})$
  • C
    $M=(1+\frac{D}{f_{e}})$
  • D
    $M=(1-\frac{D}{f_{e}})$

Answer

Correct option: A.
$M=-\frac{L}{f_{0}}(1+\frac{D}{f_{e}})$
A

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

Work function of a metal is 2.1 eV. Which of the waves of the following wavelengths will be able to emit photoelectrons from its surface(a) 4000 Å, 7500 Å(b) 5500 Å, 6000 Å (c) 4000 Å, 6000 Å(d) None of these
       
The minimum charge on an object is
The term on the RHS of the Gauss’s law shows the:
When a potential difference is applied across, the current passing through(a) An insulator at 0 K  is zero(b) A semiconductor at 0 K  is zero(c) A P-N diode at 300 K  is finite, if it is reverse biased(d) a, b, c
 
 
 
 
A radio isotope has a half life of 75 years. The fraction of the atoms of this material that would decay in 150 years will be(a) 66.6% (b) 85.5%(c) 62.5%(d) 75%
       
Kirchoffs law of junctions is also called the law of conservation of:
Rest mass energy of an electron is 0.54 MeV. If velocity of the electron is 0.8 c, then K.E. of the electron is (a) 0.36 MeV(b) 0.41 MeV(c) 0.48 MeV(d) 1.32 MeV
       
An inductor, $L$ a resistance $R$ and two identical bulbs $,\mathrm{B}_1$ and $\mathrm{B}_2$ are connected to a battery through a switch $S$ as shown in the figure. The resistance $R$ is the same as that of the coil that makes $L .$ Which of the following statements gives the correct description of the happenings when the switch $S$ is closed
Which metal is used to make ferromagnets ?
50% of the X-ray coming from a Coolidge tube is able to pass through a 0.1mm thick aluminium foil. The potential difference between the target and the filament is increased. The thickness of the aluminium foil that will allow 50% of the X-ray to pass through will be:
  1. zero
  2. < 0.1mm
  3. 0.1mm
  4. > 0.1mm