MCQ
A simple harmonic motion is represented by $F(t) = 10\sin \,(20\,t + 0.5)$. The amplitude of the $S.H.M.$ is  $a$ $=$ .... 
  • A
    $30$
  • B
    $20$
  • $10$
  • D
    $5$

Answer

Correct option: C.
$10$
c
(c)

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The pressure at the bottom of a tank containing a liquid does not depend on
In the $P-V$ diagram shown in figure $ABC$ is a semicircle. The work done in the process $ABC$ is
A bakelite beaker has volume capacity of $500\, cc$ at $30^{\circ} C$. When it is partially filled with $V _{ m }$ volume (at $30^{\circ}$ ) of mercury, it is found that the unfilled volume of the beaker remains constant as temperature is varied. If $\gamma_{\text {(beaker) }}=6 \times 10^{-6}{ }^{\circ} C ^{-1}$ and $\gamma_{(\text {mercury })}=1.5 \times 10^{-4}{ }^{\circ} C ^{-1},$ where $\gamma$ is the coefficient of volume expansion, then $V _{ m }($in $cc )$ is close to
Moment of Inertia $(M.I.)$ of four bodies having same mass ' $M$ ' and radius ' $2 R^{\prime}$ are as follows

$I _{1}=$ $M.I.$ of solid sphere about its diameter

$I _{2}=$ $M.I.$ of solid cylinder about its axis

$I _{3}=$ $M.I.$ of solid circular disc about its diameter

$I _{4}=$ $M.I.$ of thin circular ring about its diameter

If $2\left(I_{2}+I_{3}\right)+I_{4}=x$. $I_{1}$ then the value of $x$ will be.......

When a body moves with a constant speed along a circle
Two water pipes of diameters $2\ cm$ and $4\ cm$ are connected with the main supply line. The velocity of flow of water in the pipe of $2\ cm$ diameter is:
An ideal system can be brought from state $A$ to $B$ through four paths as shown in the figure. The energy given to the system is minimum in
A water fountain on the ground sprinkles water all around it. If the speed of water coming out of the fountain is $v$, the total area around the fountain that gets wet is :
In an experiment, the percentage of error occurred in the measurment of physical quantities $A, B, C$ and $D$ are $1 \%, 2 \%, 3 \%$ and $4 \%$ respectively. Then the maximum percentage of error in the measurement $X,$

where $X = \frac{{{A^2}{B^{\frac{1}{2}}}}}{{{C^{\frac{1}{3}}}{D^3}}}$, will be 

An open carriage in a goods train is moving with a uniform velocity of $10 \,m / s$. If the rain adds water with zero velocity at the rate of $5 \,kg / s$, then the additional force required by the engine to maintain the same velocity of the train is ....... $N$