Question
A solar cell is to be fabricated for efficient conversion of solar radiation to emf using material $A$. The solar cell is to be mechanically protected with the help of a coating using material $B$. If the band gap energy of materials $A$ and $B$ are $E_{A}$ and $E_{B}$ respectively, then which of the following choices is optimum for better performance of the solar cell?

Answer

$(a)$ For solar cell, we want the electrons to cross the energy gap of material $A$, which is close to $1.5 eV$. As, no emission of photon takes place in $B$ since it is only used for covering. So, its band gap must be large, i.e. $E_{B}=5 \,eV$.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

At what angle should an unpolarised beam be incident on a crystal of $\mu = \sqrt 3$ , so that reflected beam is polarised ..........$^o$
A plano-convex thin lens is used to obtain the image of a point object $O$ on the screen $S$ as shown in figure. The thickness of the lens in the middle is $0.5\ cm$ and refractive index of the material of the lens is $1.5$ . If the separation $D$ between the object and the screen is to be minimum, then the aperture diameter of the lens should be.....$cm$ (consider lens as thin)
A metallic rod is placed in a uniform electric field. Select the correct option.
Two rods $A$ and $B$ of identical dimensions are at temperature $30\,^oC$. If a heated upto $180\,^oC$ and $B$ upto $T\,^oC$, then the new lengths are the same. If the ratio of the coefficients of linear expansion of $A$ and $B$ is $4:3$, then the value of $T$ is........$^oC$
The fig. shows the motion of a planet around the un in an elliptical orbit with sun at the  focus. The shaded areas can be assumed to be equal. If $t_1$ and $t_2$ represent the  time taken for the planet to move from $A$ to $B$ and $C$ to $D$ respectively, then
A galvanometer having a coil resistance of $100\ \Omega$. gives a full scale deflection, when a currect of $I\ mA$ is passed through it. The value of the resistance, which can convert this galvanometer into ammeter giving a full scale deflection for a current of $10\ A$, is :......$Ω$
A transistor is used in an amplifier circuit in common emitter mode. If the base current changes by $100 \,\mu A$, it brings a change of $10 \,mA$ in collector current. If the load resistance is $2 \,k \Omega$ and input resistance is $1 \,k \Omega$, the value of power gain is $x \times 10^{4}$. The value of $x$ is_________
The pressure and temperature of two different gases is $P$ and $T$ having the volume $V$ for each. They are mixed keeping the same volume and temperature, the pressure of the mixture will be
A force $\vec F = 3\hat i + c\hat j + 2\hat k$ acting on a particle causes a displacement $\vec S = - 4\hat i + 2\hat j - 3\hat k$ in its own direction. If the work done is $6J$, then the value of $c$ will be
For a body moving with relativistic speed, if the velocity is doubled, then