MCQ
If temperature increases, the surface tension of a liquid
- AIncreases
- ✓Decreases
- CRemains the same
- DIncreases then decreases
✓
Answer
Correct option: B.
Decreases
(b)
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A $10 \mathrm{~m}$ long wire of $20 \Omega$ resistance is connected with a battery of $3$ volt e.m.f. (negligible internal resistance) and a $10 \Omega$ resistance is joined to it is series. Potential gradient along wire in volt per meter is
→Order of $q / m$ ratio of proton, $\alpha$-particle and electron is
→The average acceleration vector for a particle having a uniform circular motion is
Two forces $\vec{F}_1=5 \hat{i}+10 \hat{j}-20 \hat{k}$ and $\vec{F}_2=10 \hat{i}-5 \hat{j}-15 \hat{k}$ act on a single point. The angle between $\vec{F}_1$ and $\vec{F}_2$ is nearly
→A reversible engine converts one-sixth of the heat input into work. When the temperature of the sink is reduced by $62^{\circ} \mathrm{C}$, the efficiency of the engine is doubled. The temperatures of the source and sink are
→For a triode, at $V_g=-1$ volt, the following observations were taken $V_p=75 V , I_p=2 mA , V_p=100 V , I_p=4 mA$. The value of plate resistance will be
→An alternating current of frequency $200 \mathrm{rad} / \mathrm{sec}$ and peak value $1 A$ as shown in the figure, is applied to the primary of a transformer. If the coefficient of mutual induction between the primary and the secondary is $1.5 \mathrm{H}$, the voltage induced in the secondary will be
→Two circular coils can be arranged in any of the three situations shown in the figure. Their mutual inductance will be
An ideal heat engine exhausting heat at $77^{\circ} \mathrm{C}$ is to have a $30 \%$ efficiency. It must take heat at
→If the kinetic energy of a body becomes four times of its initial value, then new momentum will