Question
To get an output Y=1 from the circuit above, the input must be:
✓
Answer
- A-1 B-0 C-1
Logic gate OR is used for addition of the input signals and Logic gate AND is used for multiplication of the input signals. Hence, here inputs A = 1, B = 0 and C = 1 will yield the output Y = 1.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
More "M.C.Q (1 Marks)" from Semiconductor Electronic: Material, Devices And Simple Circuits→Semiconductor Electronic: Material, Devices And Simple Circuits — all question types→Physics STD 12 Science question papers→Rajasthan Board STD 12 Science question papers→Rajasthan Board question paper generator→
Similar questions
Which of the following is not electromagnetic wave ?
If $a = 0.98$ and current through emitter $i_e = 20 \ mA,$ the value of $b$ is
→In the given figure distance of the point from $A$ where the electric field is zero is
→Two bulbs of 100 W and 200 W working at 220 volt are joined in series with 220 volt supply. Total power consumed will be approximately. (a) 65 watt(b) 33 watt(c) 300 watt(d) 100 watt
For any charge configuration, equipotential surface through a point is _____ to electric field at that point.
Figure shows two capacitors connected in series and joined to a battery. The graph shows the variation in potential as one moves from left to right on the branch containing the capacitors:
Which relation is correct for the power of compound microscope ?
Two infinitely long parallel wires carry equal current in same direction. The magnetic field at a mid point in between the two wires is(a) Twice the magnetic field produced due to each of the wires(b) Half of the magnetic field produced due to each of the wires(c) Square of the magnetic field produced due to each of the wires(d) Zero
Root mean square value of ac voltage $V=$ $200 \sin \left(100 \pi t+\frac{\pi}{2}\right)$ is :
→Two wave pulses travel in opposite directions on a string and approach each other. The shape of one pulse is inverted with respect to the other.
-
The pulses will collide with each other and vanish after collision.
-
The pulses will reflect from each other i.e., the pulse going towards right will finally move towards left and vice versa.
-
The pulses will pass through each other but their shapes will be modified.
-
The pulses will pass through each other without any change in their shapes.