MCQ
When an input signal 1 is applied to a NOT gate, its output is:
  • A
    1
  • B
    0
  • C
    either 0 or 1
  • D
    both 0 and 1

Answer

  1. 0

Explanation:

NOT gate yields the reverse of the input signal in output, thus when an input signal 1 is applied to a NOT gate, its output is 0.

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

A cell of internal resistance r is connected to an external resistance R. The current will be maximum in R, if

(a) R = r

(b) R < r

(c) R > r

(d) R = r/2

The rate of disintegration at a given instant, is directly proportional to the number of atoms present at that instant. This is the statement of:

The wavelength of Lyman series is

(a)  

(b)  

(c)

(d)

When the particle and its anti-particle unite, the result is:

The capacitance of an air capacitor is 15 μF the separation between the parallel plates is 6mm. A copper plate of 3mm  thickness is introduced symmetrically between the plates.  The capacitance now becomes

(a) 5 μF

(b) 7.5 μF

(c) 22.5 μF

(d) 30 μF

 When electron remains between orbits, its momentum is:

In the propagation of electromagnetic waves the angle between the direction of propagation and plane of polarisation is

(a) 0o

(b) 45o

(c) 90o

(d) 180o

That part of electromagnetic spectrum which is used to study crystal structure is:
Water and mercury are filled in two cylindrical vessels up to same height. Both vessels have a hole in the wall near the bottom. The velocity of water and mercury coming Out of the holes are v1 and vrespectively.

  1. $\text{v}_1=\text{v}_2$

  2. $\text{v}_1=13.6\text{v}_2$

  3. $\text{v}_1=\frac{\text{v}_2}{\text{13.6}\cdot}$

  4. $\text{v}_1=\sqrt{13.6}\text{v}_2$

The electric field for a plane, electomagnetic wave travelling in the +y direction is shown in figure.If the electric field of the wave $\overline{\text{E}}$ is in the Z direction , then the $\overline{\text{B}}$ field is.
Image