Questions

5 Marks Questions

Take a timed test

8 questions · self-marked practice — reveal the answer and mark yourself.

Question 15 Marks
A $5 ~ m$ long steel wire hanging from the ceiling of a room has a mass of 25 kg at a radius of 10 cm . The height of the ceiling is 5.21 m . When the body is made to oscillate, it passes through touching the floor. If $Y$ is $2 \times 10^{11} N / m ^2$ and the radius of the wire is 0.05 cm . If so, what will be the velocity of the body at its lowest point?
Answer
Depth of the centre of mass of the moving body (which is a sphere of radius 10 cm and 4 kg)
from the ceiling $=$ Length of the wire + Radius of the object
$\begin{array}{l}=5 m+10 cm \\=5+\frac{10}{100}=5.1 m\end{array}$
Depth of the lowest point of the object from the ceiling $=$ Length of the wire + Diameter of the object
$\begin{array}{l}=5 m+2 \times 10 cm \\=5.2 m\end{array}$
Height of the lowest point of the object from the floor $=$ Height of the ceiling from the floor - (Length of wire + Diameter of the object)
$=5.21-5.20=0.01 m$
$\because$ While oscillating, the body moves touching the floor at the lowest point.
$\therefore$ Increase in length of wire at lowest point $=$ 0.01 m and depth from the ceiling of the centre of mass of the body $=5.1+0.01=5.11 m$
Force applied on the body due to increase in length of wire by 0.01 m
$F=\frac{YAl}{L}$
Here, $\Delta L =$ Increase in length, $A =$ Cross-sectional area, $Y=$ Young's Modulus of elasticity of material of a wire, $L =$ Original length.
$\begin{aligned}
\therefore \quad F & =\frac{Y \times \pi r^2 l}{L} \\& =\frac{2 \times 10^{11} \times 3.14 \times\left(5 \times 10^{-4}\right)^2 \times(0.01)}{5} \\F & =\frac{2 \times 10^{11} \times 3.14 \times 25 \times 10^{-8} \times 10^{-2}}{5} \\
F & =\frac{2 \times 3.14 \times 25 \times 10^1}{5}=314 N\end{aligned}$
The second force on the object is its weight
$W=mg=25 \times 9.8$
$=245 N$, this force is applied downwards
Resultant force on the object
$F=314-245=69 N \text { upwards. }$
$\therefore$ The motion of the body is circular motion and provides resultant centripetal force on the body, if $v$ is the velocity of the body at lowest point then
$\begin{aligned}\frac{m v^2}{r} & =F^{\prime} \\\frac{25 \times v^2}{5.11} & =F^{\prime}=69 \\v^2 & =\frac{69 \times 5.11}{25} \\v & =\sqrt{\frac{69 \times 5.11}{25}} \\& =3.76 m / s\end{aligned}$
View full question & answer
Question 25 Marks
Derive the formula for work done of stretched a wire.### The length of a wire is $L$, when a weight Mg is suspended on it, it length is increased by $\Delta L$ then prove that the work done is
$ W =\frac{1}{2} \text { Stress } \times \text { Strain }$
Answer
SELF
View full question & answer
Question 45 Marks
Describe Searl's method to determine Young's Modulus of elasticity and explain the behaviour of a stretched wire under increasing load.
Answer
SELF
View full question & answer
Question 55 Marks
Explain by giving definition of Bulk Modulus of elasticity, Modulus of Rigidity and compressibility what are their units and dimensions? What is the relation between co-efficient of elasticity $Y , K$ and $\eta$ ?
Answer
SELF
View full question & answer
Question 65 Marks
Write Hooke's law. On what does the value of co-efficient of elasticity depend? Draw a graph between stress and strain with in the elastic limit.###Write Hooke's law. How to determine the coefficient of elasticity of a material of wire in the laboratory? Explain. Make necessary diagram also Compare the Young's Modulus of elasticity of different material.
Answer
SELF
View full question & answer
Question 75 Marks
Explain the terms stress, strain and co-efficients of elasticity. Explain their different types, write their units and also tell their dimensional formula.
Answer
SELF
View full question & answer
Question 85 Marks
What is meant by limit of elasticity? Write Hooke's law of elasticity. Based on this establish the formula of Young's Modulus of elasticity and give the definition of Young's Modulus of elasticity.
Answer
SELF
View full question & answer