A capacitor of capacity $C$ is charged to a steady potential difference $V$ and connected in series with an open key and a pure resistor $'R'$. At time $t = 0$, the key is closed. If $I =$ current at time $t$, a plot of log $I$ against $'t'$ is as shown in $(1)$ in the graph. Later one of the parameters i.e. $V, R$ or $C$ is changed keeping the other two constant, and the graph $(2)$ is recorded. Then
Diffcult
Download our app for free and get started
It is discharging of capactior
$I=\frac{E}{R} e^{-t / R C}$
$\log I=\log \frac{E}{R}-\frac{t}{R C}$
Intercept is constant $\Rightarrow \mathrm{E} \& \mathrm{R}$ constant
$|$slope $|$ dercrease $\Rightarrow C \uparrow$
Download our app
and get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Two spherical conductors each of capacity $C$ are charged to potentials $V$ and $ - V$. These are then connected by means of a fine wire. The loss of energy will be
In a parallel plate capacitor the separation between the plates is $3\,mm$ with air between them. Now a $1\,mm$ thick layer of a material of dielectric constant $2$ is introduced between the plates due to which the capacity increases. In order to bring its capacity to the original value the separation between the plates must be made......$mm$
Three concentric spherical metallic shells $X , Y$ and $Z$ of radius $a , b$ and c respectively $[ a < b < c ]$ have surface charge densities $\sigma,-\sigma$ and $\sigma$, respectively. The shells $X$ and $Z$ are at same potential. If the radii of $X$ and $Y$ are $2\,cm$ and $3\,cm$, respectively.The radius of shell $Z$ is $......cm$.
A parallel plate condenser is filled with two dielectrics as shown. Area of each plate is $A\;metr{e^2}$ and the separation is $t$ $metre$. The dielectric constants are ${k_1}$ and ${k_2}$ respectively. Its capacitance in farad will be
The area of each plate of a parallel plate capacitor is $20\,cm^2$ and separation between the plates is $2\,mm$. If dielectric strength of air is $3 \times 10^6\,V/m,$ the maximum possible value of emf of the battery, which can be connected across the plates of this capacitor and the corresponding charge on the plates is
Between the plates of a parallel plate condenser, a plate of thickness ${t_1}$ and dielectric constant ${k_1}$ is placed. In the rest of the space, there is another plate of thickness ${t_2}$ and dielectric constant ${k_2}$. The potential difference across the condenser will be