A crystal diode is a
[MP PET 2004]
Download our appand get started for free
Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*
Similar Questions
- 1The slope of plate characteristic of a vacuum tube diode for certain operating point on the curve is $10^{-3} \frac{ mA }{ V }.$ The plate resistance of the diode and its nature respectivelyView Solution
- 2The reverse biasing in a $P N$ junction diodeView Solution
- 3A triode has a mutual conductance of $2 \times 10^{-3} mho$ and an amplification factor of $50.$ The anode is connected through a resistance of $25 \times 10^3$ ohms to a $250$ volts supply. The voltage gain of this amplifier isView Solution
- 4View SolutionIn a triode amplifier, the value of maximum gain is equal to
- 5The ratio of thermionic currents $(I / I)$ for a metal when the temperature is slowly increased $T_0$ to $T$ as shown in figure. ( $I$ and $I$ are currents at $T$ and respectively). Then which one is correct?View Solution
- 6When $N$-type of semiconductor is heatedView Solution
- 7In a triode, $g_m=2 \times 10^{-3} ohm ^{-1} ; \mu=42$, resistance load, $R=50$ kilo ohm. The voltage amplification obtained from this triode will beView Solution
- 8A diode having potential difference $0.5 V$ across its junction which does not depend on current, is connected in series with resistance of $20 \Omega$ across source. If $0.1 A$ passes through resistance then what is the voltage of the sourceView Solution
- 9In a transistor in $CE$ configuration, the ratio of power gain to voltage gain isView Solution
- 10View SolutionWhich is the correct diagram of a half-wave rectifier