MCQ
Match List$-I$ with List$-II$.

List$-I$ List$-II$
$(A)$ Angular momentum $(I)$ $\left[ ML ^2 T ^{-2}\right]$
$(B)$ Torque $(II)$ $\left[ ML ^{-2} T ^{-2}\right]$
$(C)$ Stress $(III)$ $\left[ ML ^2 T ^{-1}\right]$
$(D)$ Pressure gradient $(IV)$ $\left[ ML ^{-1} T ^{-2}\right]$

Choose the correct answer from the options given below:

  • A
    $(A)-(I), (B)-(IV), (C)-(III), (D)-(II)$
  • $(A)-(III), (B)-(I), (C)-(IV), (D)-(II)$
  • C
    $(A)-(II), (B)-(III), (C)-(IV), (D)-(I)$
  • D
    $(A)-(IV), (B)-(II), (C)-(I), (D)-(III)$

Answer

Correct option: B.
$(A)-(III), (B)-(I), (C)-(IV), (D)-(II)$
b

Need a full question paper?

Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.

Start Generating Free

Similar questions

The instantaneous velocity of a body can be measured
Calculate the work done, if a wire is loaded by $'Mg'$ weight and the increase in length is $'l'$
$A$ sphere of mass $M$ and radius $R$ is attached by a light rod of length $l$ to $a$ point $P$. The sphere rolls without slipping on a circular track as shown. It is released from the horizontal position. the angular momentum of the system about $P$ when the rod becomes vertical is :
A screw gauge of pitch $0.5\,mm$ is used to measure the diameter of uniform wire of length $6.8\,cm$, the main scale reading is $1.5\,mm$ and circular scale reading is $7$. The calculated curved surface area of wire to appropriate significant figures is $......cm^2$ . [Screw gauge has $50$ divisions on the circular scale]
The figure shows an isosceles triangular plate of mass $M$ and base $L$. The angle at the apex is $90^o$. The apex lies at the origin and the base is parallel to $X$ -axis The moment of inertia of the plate about the $y$ -axis is 
A particle $A$ is projected vertically upwards. Another identical particle $B$ is projected at an angle of $45^o $ . Both reach the same height. The ratio of the initial kinetic energy of $A$ to that of $B$ is
A slab consists of two parallel layers of two different materials of same thickness having thermal conductivities $K_1$ and $K_2$ . The equivalent conductivity of the combination is
The isothermal bulk modulus of a perfect gas at normal pressure is
In a heat engine, the temperature of the source and sink are $500\, K$ and $375\, K$. If the engine consumes $25\times10^5\, J$ per cycle, the work done per cycle is
A projectile is thrown with a velocity of $50\,\, ms^{^{-1}}$ at an angle of $53^o$ with the horizontal The equation of the trajectory is given by