Question
Microscope is an optical instrument which
✓
Answer
( b)In microscope final image formed is enlarged which in turn increases the visual angle.
Need a full question paper?
Generate a complete, print-ready paper with questions like this in minutes — across 16+ boards, with answer keys.
Explore more
Similar questions
A short-circuited coil is placed in a time-varying magnetic field. Electrical power is dissipated due to the current induced in the coil. If the number of turns were to be quadrupled and the wire radius halved, the electrical power dissipated would be
Two straight long conductors $AOB$ and $COD$ are perpendicular to each other and carry currents ${i_1}$ and ${i_2}$. The magnitude of the magnetic induction at a point $ P$ at a distance a from the point $O$ in a direction perpendicular to the plane $ACBD$ is
→A uniform electric field and a uniform magnetic field are acting along the same direction in a certain region. If an electron is projected in the region such that its velocity is pointed along the direction of fields, then the electron
A wire is suspended by one end. At the other end a weight equivalent to $20\, N$ force is applied. If the increase in length is $1.0\, mm$, the increase in energy of the wire will be ....... $joule$
→Monochromatic light of frequency $6.0 \times 10^{14}\,\, Hz$ is produced by a laser. The power emitted is $2 \times 10^{-3}\,\, W.$ The number of photons emitted, on the average, by the source per second is
→Assertion : The binding energy per nucleon, for nuclei with atomic mass number $A > 100$, decreases with $A$.
→Reason : The nuclear forces are weak for heavier nuclei.
There are three resistance coils of equal resistance. The maximum number of resistances you can obtain by connecting them in any manner you choose, being free to use any number of the coils in any way is
A closely wound flat circular coil of $25$ $turns$ of wire has diameter of $10\, cm$ and carries a current of $4\, ampere$. Determine the flux density at the centre of a coil
→A Carnot engine with efficiency $50\,\%$ takes heat from a source at $600\,K$. In order to increase the efficiency to $70\,\%$, keeping the temperature of sink same, the new temperature of the source will be $.........\,K$
→Two identical bar magnets are fixed with their centres at a distance $d$ apart. A stationary charge $Q$ is placed at $P$ in between the gap of the two magnets at a distance $D$ from the center $O$ as shown in the figure. The force on the charge $Q$ is
→