Young’s modulus of perfectly rigid body material is
Easy
Download our app for free and get startedPlay store
(b) From Hooke's law, Young modulus $Y=\frac{S t r e s s}{S t r a i n}$

The Strain produced in a perfectly rigid body is zero i.e Strain$=0$

$\therefore Y=\frac{S t r e s s}{0} \quad \Longrightarrow Y=\infty$

Thus the Young's modulus of perfectly rigid body material is infinite.

art

Download our app
and get started for free

Experience the future of education. Simply download our apps or reach out to us for more information. Let's shape the future of learning together!No signup needed.*

Similar Questions

  • 1
    An elevator cable can have a maximum stress of $7 \times 10^7\,N/m^2$ for appropriate safety factors. Its maximum upward acceleration is $1.5\,m/s^2$ . If the cable has to support the total weight of $2000\,kg$ of a loaded elevator, the minimum area of crosssection of the cable should be ....... $cm^2$  $(g = 10\,m/s^2)$
    View Solution
  • 2
    Hook's law defines
    View Solution
  • 3
    The dimensions of four wires of the same material are given below. In which wire the increase in length will be maximum when the same tension is applied
    View Solution
  • 4
    Which of the following is true for elastic potential energy density
    View Solution
  • 5
    When a force is applied on a wire of uniform cross-sectional area $3 \times {10^{ - 6}}\,{m^2}$ and length $4m$, the increase in length is $1\, mm.$ Energy stored in it will be $(Y = 2 \times {10^{11}}\,N/{m^2})$
    View Solution
  • 6
    If the tension on a wire is removed at once, then
    View Solution
  • 7
    In the below graph, point $D$ indicates
    View Solution
  • 8
    The following four wires are made of the same material. Which of these will have the largest extension when the same tension is applied?
    View Solution
  • 9
    Each of three blocks $P$, $Q$ and $R$ shown in figure has a mass of $3 \mathrm{~kg}$. Each of the wire $A$ and $B$ has cross-sectional area $0.005 \mathrm{~cm}^2$ and Young's modulus $2 \times 10^{11} \mathrm{~N} \mathrm{~m}^{-2}$. Neglecting friction, the longitudinal strain on wire $B$ is____________ $\times 10^{-4}$. $\left(\right.$ Take $\mathrm{g}=10 \mathrm{~m} / \mathrm{s}^2$ )
    View Solution
  • 10
    Two persons pull a wire towards themselves. Each person exerts a force of $200 \mathrm{~N}$ on the wire. Young's modulus of the material of wire is $1 \times 10^{11} \mathrm{~N} \mathrm{~m}^{-2}$. Original length of the wire is $2 \mathrm{~m}$ and the area of cross section is $2 \mathrm{~cm}^2$. The wire will extend in length by . . . . . . . .$\mu \mathrm{m}$.
    View Solution